Heating Controller controlls the boiler based on the received temperature values from the thermostat.

The Heating Controller can work with up to 4 IT-200 thermostat. Every thermostat has an output port that can be switched. If the temperature difference is bigger than 1C degree the output port is continuosly switched on. If the difference is smaller then 1C degree the output port is switch on and off. Which port is switched os sent to the central server and can be checked on the web GUI.

The controller can also work with the WS-100 external thermometer and control the heating based on the received external teperature values. In this case the controller takes also into consideration the measured values in the incoming and outgoing circuit.